Jump to: Bob Harrington’s Rockets
Jump to: Chris Michielssen’s Rockets
READ BEFORE CONTINUING
ANY MATERIAL DOWNLOADED OR OTHERWISE OBTAINED THROUGH THE USE OF THE SERVICE IS DONE AT YOUR OWN DISCRETION AND RISK AND THAT YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGES OR INJURY THAT RESULTS FROM THE DOWNLOAD OF ANY SUCH MATERIAL.
Information about the builds:
The following rockets are mostly made from cardstock but require supporting rocket parts.
The plastic nose cone packs are the preferred method for constructing these rockets however there is now an alternative. You can use these nosecone templates to create your rockets entirely out of cardstock.
Some of these rockets can be flown as 13mm (if you want to lose them) or they are ideal for conversion to Micromax. The following files are in the Tiff and PDF format. It is best to save them to your computer and print at original size from an image program.(right click and “save link/target as”)
Print the photos of the rockets as building guides
Bob Harrington’s Mini Rocket Clones
Mini Omega – PDF 2 Stage – needs 13mm A3-0T or A10-0T as booster
Micro Baka (needs Mosquito nose cone)
Mini V1 – (needs Mosquito nose cone)
The Starship Vega: Vega.pdf
Notes on building the Vega: Vega-Notes.pdf
Mini Blue Bird Zero – (Uses Quark nose cone and flies great on A3-4T’s)
Alien Space Probe -Mini Bertha -Orbital Transport -Goblin
Alien Space Probe – needs Mosquito Type nose cone
Mini Bertha – needs Mosquito Type nose cone
Goblin -uses Quark style nose cone
Sentinal – uses Quark style nose cone
—-Star Blazer new——- Star Blazer old
Phoenix-(needs Swift nose cone)
NASA Pegasus -(needs Quark nose cone)
My builds of Bob’s rockets
Chris Michielssen’s Rockets
* some of Chris’s MMX builds are meant to be wrapped around a BT-5 tube unless otherwise noted
Sky Writer No. 2 MMX(PDF)- (build needs 1/4″ dowel for nosecone)
MMX Missile Toe(PDF) – (needs Mosquito size nose cone )
MMX Sky Shriek(PDF) – (needs Mosquito size nose cone )
MMX Galaxy Guppy(PDF) – (needs Mosquito size nose cone )
MMX Cloud Hopper(PDF) – (needs Mosquito size nose cone )
MMX Star Snoop (PDF) – (needs Mosquito size nose cone )
MMX Piglet-sus (PDF) – (needs Mosquito size nose cone )
A-20 Demon (PDF)
– requires the Semroc BNC-20AM nose cone
– Wrap the printed skin around a BT 20 tube
Instructions included in the PDF
-needs Semroc Nosecone BNC-522P
Estes Patriot #0652
Mini Bertha T Engine Downscale – (PDF)
needs BT-5 and Mosquito style nose cone
Astro 1 Downsize (PDF)
BT-5 based and meant for (low altitude) MMX flights or even 13mm T flights
Use the 2 3/4” long cone from the Estes NC-20 four pack.
Paint the nose cone black.
The Nose Cone is a Semroc BC-522P, 2.14” tall. This is the closest profile
available for the downscale. Paint the nose cone black.
Download : Black Brant VB (PDF)